AH3 series Withdrawal sleeve

Introduction:

MJE withdrawal sleeve can be used on mount bearing with a tapered bore on cylindrical seats of stepped shafts.The sleeve is located on the shaft by a nut or an end plate.

To secure the bearing to the shaft,usually press the withdrawal sleeve into the bearing bore.In order to do this better,particularly where larger bearings are concerned,considerable force is required to overcome the friction between the mating surface of the bearing and sleeve.Mounting and dismounting of bearings on  withdrawal sleeves can be facilitated considerably by using a hydraulic nut.

The withdrawal sleeve is installed at bearing end to disassemble.For the conic apertures bearing, it is very easy to install,disassemble and repair. It is widely used in the machinery equipment of light industry,metal rolling mill,etc.

Additional modes:

Suffix Description
H Code of type for adapter sleeve
A Code of type for adapter sleeve
AH Code for adapter sleeve with taper core 1:12
AH2 Code for adapter sleeve with taper core 1:30
AHX Code for adapter sleeve with taper core 1:12 and different size of screw thread
KM Lock nut code with 4 groove
HM Lock nut code with 8 groove
MB Lock washer code
MS Lock code
WhatsApp Online Chat !